How to Replace
Coin Acceptor LED Sensor

There may be instances when a customer must replace a LED sensor in a coin acceptor.  LED sensor can fall out during shipping and these instruction will aid in replacing LED sensors.  A indication that a LED sensor need to be replaced is the machine will continue beeping non stop, while the front light flashes.  The front light flashing on the coin acceptor is an indication coin acceptor is causing the problem.

Step 1

Coin Acceptor LED Sensor

Material Plastic
Dimensions
Width 6 millimeters
Length 18 millimeters

---

Step 2

Unplug machine from wall outlet.  In order to position the sensor correctly we a the blade of the box cutter may be required.

---

Step 3

Locate the small flap door on the coin acceptor and open it.  Once you open the door it will expose the 3 LED sensors.

---

Step 4

Once the door is open the 3 LED sensors are exposed.  The LED sensors are the clear plastic pieces located in the coin channel.  The coin channel is the path the inserted coin takes to increment the coin box timer.

---

Step 5

As can been seen in this picture, 1 of the 3 sensor is missing.  The missing sensor can be indicated by the red circle.

---

Step 6 - Video Demonstration

Replace the LED sensor by placing inside opening and pushing in the hole.  The video shows how to replace the sensor.